Peaty's Holeshot Tubeless Puncture Plugger Kit
Impossible de charger la disponibilité pour le Service de retrait
Marque :
The Peaty’s Holeshot Tubeless Plugger Kit features unique single-sided fork design. This allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.
Made from high quality 316 Stainless steel. The fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft. To clean out punctures before plugging and to be as slim as possible. So it doesn’t widen the size of the hole already there.
Shrinking down to a tiny 65mm x 19mm. This tool has been designed to generally easily fit into your pocket or slot into a tool wrap or backpack.
With knurling on the tool base and ribbing on the lid. You shouldn’t have any issues gripping the tool, even in the muddiest of conditions.
To start with, simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug.
This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
KEY FEATURES:
- Available in 12x Chris King colours.
- Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork.
- With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn’t widen the size of the – hole already there.
- Fork made from 316 stainless steel.
- Body made from anodised 6061 aluminium.
- Knurled body and ribbed lid / handle for extra grip.
- Weather sealing o-rings make the tool waterproof when assembled.
- Each kit comes with one sheet of 3x 1.5mm and one sheet of 3 x 3mm plugs.
Livraison et expédition
Livraison et expédition
La livraison aux clients au Royaume-Uni est toujours GRATUITE !
Les commandes internationales sont soumises à des frais de livraison standard en fonction de la valeur de l'article acheté.
Livraison au Royaume-Uni
Toutes les commandes passées au Royaume-Uni sont expédiées par coursier sous 24 ou 48 heures, mais veuillez prévoir un délai de traitement de 24 heures. Nos coursiers récupèrent les commandes uniquement les jours ouvrés. Nous nous efforçons d'expédier votre commande dans les 24 heures suivant la réception du paiement ; nos clients reçoivent donc généralement leur commande sous 1 à 3 jours. Besoin de votre article rapidement ? Contactez-nous, nous sommes là pour vous aider.
Livraison internationale
Les commandes internationales sont expédiées par le service de courrier aérien de Royal Mail, qui prévoit une livraison en Europe de l'Ouest sous trois à cinq jours ouvrés, en Europe de l'Est sous cinq jours ouvrés et dans le reste du monde sous sept jours. Cependant, ce délai de livraison n'est qu'indicatif et peut être plus long. Les clients internationaux sont également responsables des droits d'importation en vigueur dans leur pays.
Suivi des commandes
La plupart de nos articles sont expédiés avec un service de suivi. Les articles de petite taille et de faible valeur peuvent ne pas l'être. Ceci nous permet de minimiser nos frais de port et d'offrir à nos clients le meilleur rapport qualité-prix. Nous expédions par courrier suivi, assuré ou recommandé sur demande. Veuillez nous contacter avant de passer commande en ligne, car des frais de livraison supplémentaires s'appliqueront.
Paiement et sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons accéder à vos informations de carte bancaire.




